/* */

How to save drive parameters?

May 2nd, 2023 / Updated: May 25th, 2023
  1. Changes to drive parameters must be manually saved otherwise they will be lost after power-down.
  2. Navigate to the beginning of any menu which will have a number followed by 00 i.e 1.00 or 2.00.
  3. Press ‘M’ until the cursor flashes on the value (which will be 0).
  4. Using the keypad change this 0 to 1000 and press M followed by the red reset button. The 1000 will then change back to 0. This indicates that the parameters have been saved. If the value of 1000 does not change back to 0 then the save has not been successful, repeat the process. To confirm parameters have saved, power down the drive i.e turn off mains isolator, UPS if fitted and disconnect any backup batteries. Then reinstate the supply and check the last parameter edited.

More News