February 21st, 2023
/ Updated: March 28th, 2023
- Changes to drive parameters must be manually saved otherwise they will be lost after power down
- Navigate to the beginning of any menu which will have a letter followed by 00 i.e A.00 or E.00
- Press ENTER (button above Red button) until the cursor flashes on 00
- Using the keypad Navigate UP and select SAVE PARAMETERS then press ENTER, followed by the Red Reset Button. The text SAVE PARAMETER will then change back to 0. This indicates that the parameters have been saved. To confirm parameters have saved, power down the drive i.e turn off mains isolator, UPS if fitted and disconnect any backup batteries. Then reinstate the supply and check the last parameter edited.