T: +44 (0) 1352 793222
Home | ED5 Form
Please complete the ED5 engineering form(s) and supply all relevant information in order that the lift control panel(s) can be designed and manufactured. Complete it carefully as any changes or incorrect information may result in additional cost and delayed delivery. Any features requested in this document that are not already included in the quotation may be subject to a price increase.
For Modernisation jobs, all application data on existing equipment and any requirements not covered on the quotation should be recorded and attached to this form.
Please contact TVC if any questions arise regarding the required data or help in completing these forms on 01352 793222.
Please call our sales team on 01352 793222 if you have any queries regarding this form
Please complete the attached questionnaire and supply all relevant information in order that the lift control panel(s) may be designed and manufactured. Inaccurate or incomplete information may delay delivery.
For Modernisation jobs, all application data on existing equipment and any requirements not covered on the form should be recorded and attached to this form.
Please contact TVC if any questions arise regarding the required data.
Front Entrances
Rear Entrances (if applicable)
Floor Height (M)
(3M floor heights will be assumed if not specified)
(If free issue encoder, please ensure we receive the unit at least two weeks before despatch date, if not, we reserve the right to dispatch the contract minus the free issue equipment fitted)
LIMAX3CP
Can be used for lifts requiring the these features:
LIMAX3CP can be used for the following safety features, it will be pre-configured at TVC to suit the site requirements, therefore, please ensure all safety features required are selected from these forms.
Note: these forms will be the official document used to configure your Limax3CP. Complete them carefully as any changes will require a replacement Limax3CP, as these features cannot be changed on site.
Please select all options required to be included within the TVC control system.
TVC offer “Pre-wired” lift devices to enable faster site installation:e.g. Trailing Flexes, Cartop Control Unit, COP, LOP.
EN81-21: Clause 5.5 Reduced clearances in headroom
EN81-21: Clause 5.6 Extendable car roof balustrade
EN81-21: Clause 5.7 Reduced clearances in pit
EN81-21: Clause 5.8 Extendable apron
For more information and specifications of our cabinet enclosure, please visit this page of our website.
Approximate Distances Between Cabinets
To view all of the standard features included, please visit this page of our website.
TVC offer a range of ancillary equipment, prewired or unwired. Select Prewired for faster site installation.
TVC offer the following Lift Car devices, pre-wired.
Trailing flexes connected between the lift control panel and the Cartop termination box (CTTB) TVC will supply 2 x (LSF 20 x 0.75mm2, 2 x 2x 0.5mm2 SCR TW) and 1 x (LSF 24 x 1mm2) trailing flexes with pre-wired connectors at the TVC control panel end and bare ended at the Cartop termination box end.
Standard loom length supplied
The following devices can be supplied fitted and wired to the Cartop termination box (CTTB) or supplied separately with a pre-wired loom. Select which devices are required and whether they are supplied separately or pre-fitted and wired.
TVC offer the following Lift Room devices, pre-wired.
TVC offer the following Lift Machine Room devices, supplied separately and un-wired.
If pre-wiring is required please complete the “Pre-wired” forms.
TVC offer the following Lift Shaft devices, pre-wired for connection to the lift control panel or Pit termination box (PTB). TVC supply the Pit termination box as standard when “Pre-wired” is selected.
Looms connected between the lift control panel and the Pit termination box (PTB) TVC will supply 1 x (LSF 34 x 0.75mm2) & 1 x (LSF 25 x 0.75mm2) round multicore looms with pre-wired connectors on the TVC control panel end and bare ended at the Pit termination box end.
TVC offer the following Lift Shaft devices, supplied separately and un-wired.
Notes: The Limax3CP device carries out the “Limit switch” functionality without the need for mechanical limit switches. The Limit switches (When selected, see note above) connect directly to the lift control panel and not to the Pit termination box.
The following devices can be supplied fitted and wired to the Pit termination box (PTB) or supplied separately with a pre-wired loom. Select which devices are required and whether they are supplied separately or pre-fitted and wired.
TVC offer the following devices, pre-wired for the lift landings.
TVC can offer the Dewhurst surface/flush mounted range of car operating panels, pre-wired using LSZH cable or un-wired, they come in various options as below:
Car Operating Panel 2mm thick, Brushed stainless steel, 304 grade stainless steel, Vertical linish Engraving - Company logo, payload etc. to be specified per fixture.
Width of fixture (mm)200
Pushbuttons - US91-EN range
Black/green/yellow finish, chrome bezels, spade terminals,24V dual, red/green/yellow illumination,2 N/O contacts
Registration feedback Embuzz and grille
Autodialler EM181 - Default. Others are available un-wired, studding and grilling only.
Speaker 5W speaker and grille
Pushes
Floor markings
TVC can offer the Dewhurst surface/flush mounted range of landing operating panels, pre-wired using LSZH cable or un-wired, they come in various options as below:
Landing Operating Panel1.5mm thick, Brushed stainless steel, 304 grade stainless steel, Vertical finish
Pushbuttons – US91-EN rangeBlack finish, chrome bezels, spade terminals, 24V dual, red illumination, 2 N/O contact
Keyswitch Spring return 0-60°, 1 C/O contact - Pit Access Reset Non-Captive 0-90°, 1 C/O contact - Emergency Recall or Fire Service
Registration feedback En buzzer for un-wired & TVC call module for pre-wired
Configuration variants En buzzer for un-wired & TVC call module for pre-wired. Select quantity required for each.
TVC can offer the Dewhurst surface/flush mounted range of landing indicator panels, pre-wired using LSZH cable or un-wired, they come in various options as below:
Landing Indicator Panel1.5mm thick, Brushed stainless steel, 304 grade stainless steel, Horizontal linish
Display blankSelect quantity required for each.
Please ensure all details are correct before submitting this form. By submitting this form you are agreeing the all details completed to be correct. Any amendments after form submission may incur additional charges. We therefore advise that you ensure all details are correct.
Δ
